Enhance the performance of your engine with extrude hone porting in Dallas TX
If you know a lot about cars, you probably already know that parts like intake and exhaust manifolds are seldom optimized for the best fuel and air flow in your average vehicle--instead, these parts must be ported. But have you considered the best way to get your porting done?
Hint: it’s not porting by hand.
It’s extrude hone porting in Dallas TX.
Extrude hone porting, a process which was pioneered over 30 years ago by Extrude Hone AFM’s founder, has since become the process of choice for all kinds of engine enthusiasts. Several manufacturers including Cadillac and Ford have adopted this process for their top models, and countless individuals have used it for aftermarket improvements on:
- Racing engines
- Muscle cars
- Motorcycles
- Personal watercraft
- High-performance trucks
How Extrude Hone Porting Works
One of the biggest limitations of hand porting--besides the incredible level of skill and control that is required to abrade the metal evenly--is that it can’t reach deep into the twisting passages of a manifold or other part. Extrude hone porting in Dallas TX, on the other hand, can reach every millimeter of all sides of any passage. This is possible because extrude hone porting uses an abrasive-laden polymer that can conform to the exact dimensions of the passage. As the polymer runs through the part, it becomes a flexible slug that sands away material evenly on all sides. The process can be controlled with a high degree of precision to ensure that the porting gets done to the exact specs you have calculated will enhance your engine.
Benefits of Extrude Hone Porting in Dallas TX
Extrude hone porting in Dallas TX can deliver many benefits for any passage that gas or liquid will be flowing through. The most commonly ported parts are intake and exhaust manifolds, but we can also port engine heads, turbo impellers, housings and pumps, and 2 or 4 stroke cylinders.
This process does not alter flow volume, but it does improve flow velocity. Combustion becomes more intense, encouraging:
- Increased horsepower
- More thrust
- More torque
- Increased fuel efficiency
- Reduced emissions
In our experience, flow increases about 25 percent after extrude hone porting in Dallas TX. This will translate into different degrees of improvement in performance depending on how your engine is set up.
Why Choose Extrude Hone AFM
At Extrude Hone AFM, abrasive flow machining is our whole business. We’re not some hot rod shop that has just purchased an AFM machine for extrude hone porting in Dallas TX--we know the science behind this method and we can guarantee you professional, consistent results that will meet your exact specs.
We are happy to provide quotes and more information about extrude hone porting. Please call (562) 531-2976 or use our online contact form to reach us.
