Honed Out in Kansas City MO

Get your engine components honed out in Kansas City MO to improve performance

Are you constantly looking for the next upgrade you can make to enhance your engine? Consider getting your intake manifold honed out in Kansas City MO by the professionals at Extrude Hone.

How Extrude Honing Works

Getting a part honed out in Kansas City MO requires the removal of a small amount of metal from the interior surfaces. While hand honing is possible, it is not the most efficient process. It takes far too long, and it may not reach the deepest interior passages. With abrasive flow machining, you can achieve totally consistent abrasion throughout the entire part. This is made possible through the use of a specially formulated polymer media that, when pressurized, conforms to the shape of the interior passages and abrades them on all sides. This media suspends the abrasive particles uniformly and allows them to recirculate so that you get even surface removal on every twist and bend.

Benefits for Performance

AFM ProcessGetting essential engine components honed out in Kansas City MO can increase fuel and air flow by up to 25 percent. This in turn will give you:

  • Increased horsepower
  • More thrust
  • More torque
  • Better fuel efficiency
  • Lower emissions

What Kind of Parts Can Be Honed Out in Kansas City MO?

With a few exceptions, most engine parts that air or fuel flows through can be honed out in Kansas City MO. We can vary the abrasive media depending on the type of metal in the part--for example, a lighter abrasive for aluminum and a heavier one for cast iron. We frequently hone intake manifolds, as well as exhaust manifolds when there is no aftermarket alternative available. One part that cannot be honed out is the header; however we can put a weld bead on the outside and then smooth down the inner weld to create a better angle for you.

Why Choose Extrude Hone

Extrude Hone pioneered the automotive abrasive flow machining process, which is now accepted and used worldwide to improve performance at top brands including Ford. We have the knowledge, skills, and experience to provide custom solutions for any project, no matter what material you’re working with or how much you need to remove. We can also perfectly flow match components.

Send Us Your Components Today

Ready to enjoy the benefits of an engine that’s been honed out in Kansas City MO? Call us at (562) 531-2976 today. Our turnaround time for aluminum parts is 7 to 11 workdays, while cast iron parts will take 3 to 4 weeks.