Extrude Hone Porting in Los Angeles CA

Enhance the performance of your engine with extrude hone porting in Los Angeles CA

If you are a gearhead, you are most likely already familiar with the benefits of porting intake and exhaust manifolds and other engine components to enhance fuel and air flow. But have you considered the best way to get your porting done?

Hint: it’s not porting by hand.

It’s extrude hone porting in Los Angeles CA.

AFM ProcessExtrude hone porting, a process which was pioneered over 30 years ago by Extrude Hone AFM’s founder, has since become the process of choice for all kinds of engine enthusiasts. Several manufacturers including Cadillac and Ford have adopted this process for their top models, and countless individuals have used it for aftermarket improvements on:

  • Racing engines
  • Muscle cars
  • Motorcycles
  • Personal watercraft
  • High-performance trucks

How Extrude Hone Porting Works

Unlike hand porting methods which are prone to error, extrude hone porting in Los Angeles CA reaches every part of the passage in one pass to remove material at a consistent and uniform rate. This is possible because extrude hone porting uses an abrasive-laden polymer that can conform to the exact dimensions of the passage. As the polymer runs through the part, it becomes a flexible slug that sands away material evenly on all sides. Because we understand the physics of the process, we can easily adjust multiple variables to deliver the precise result you want in terms of material removal.

Benefits of Extrude Hone Porting in Los Angeles CA

AFM ProcessAFM ProcessExtrude hone porting in Los Angeles CA can deliver many benefits for any passage that gas or liquid will be flowing through. The biggest improvements in engine performance are seen from porting the manifolds, but porting can also improve engine heads, turbo impellers, housings and pumps, and 2 or 4 stroke cylinders.

This process does not alter flow volume, but it does improve flow velocity. This in turn encourages improved combustion in the engine, resulting in:

  • Increased horsepower
  • More thrust
  • More torque
  • Increased fuel efficiency
  • Reduced emissions

In our experience, flow increases about 25 percent after extrude hone porting in Los Angeles CA. The corresponding improvement in performance will depend on the configuration of your engine.

Why Choose Extrude Hone AFM

At Extrude Hone AFM, abrasive flow machining is our whole business. We’re not some hot rod shop that has just purchased an AFM machine for extrude hone porting in Los Angeles CA--we know the science behind this method and we can guarantee you professional, consistent results that will meet your exact specs.

To learn more, please contact us at (562) 531-2976.