Extrude Hone Porting in Dania Beach FL

Enhance the performance of your engine with extrude hone porting in Dania Beach FL

If you are a gearhead, you are most likely already familiar with the benefits of porting intake and exhaust manifolds and other engine components to enhance fuel and air flow. But can you name the number one method for porting?

Hint: it’s not hand porting.

It’s extrude hone porting in Dania Beach FL.

AFM ProcessAlso sometimes called PowerFlow, the Extrude hone porting process was invented by one of our company’s founders in 1974. The first engine improved by porting was actually a chainsaw, but the benefits of the process were quickly adapted to all kinds of engines. Several manufacturers including Cadillac and Ford have adopted this process for their top models, and countless individuals have used it for aftermarket improvements on:

  • Racing engines
  • Muscle cars
  • Motorcycles
  • Personal watercraft
  • High-performance trucks

How Extrude Hone Porting Works

Unlike hand porting methods which are prone to error, extrude hone porting in Dania Beach FL reaches every part of the passage in one pass to remove material at a consistent and uniform rate. While hand porting is done with brushes and files, extrude hone porting is done with an abrasive polymer media. As the polymer runs through the part, it becomes a flexible slug that sands away material evenly on all sides of the hole or passage. Our polymer media will flow through countless cycles without clogging or separating. Fresh abrasive particles will constantly recirculate to the edges of the media, so you always get even honing on every exposed surface. We can control the process to remove the precise amount of material required to enhance your part.

Benefits of Extrude Hone Porting in Dania Beach FL

AFM ProcessAFM ProcessBy reducing turbulence, extrude hone porting in Dania Beach FL can benefit any passage that will be directing air or fuel through the engine. The biggest improvements in engine performance are seen from porting the manifolds, but porting can also improve engine heads, turbo impellers, housings and pumps, and 2 or 4 stroke cylinders.

The result of the extrude hone porting process is increased flow velocity, not flow volume. This in turn encourages improved combustion in the engine, resulting in:

  • Increased horsepower
  • More thrust
  • More torque
  • Increased fuel efficiency
  • Reduced emissions

The exact benefits you’ll see in each of these areas after extrude hone porting in Dania Beach FL depends on how your engine is configured. However, you can expect to see up to 25 percent increase in flow after honing an intake manifold, which will give you an idea of how much performance will improve.

Why Choose Extrude Hone AFM

At Extrude Hone AFM, we invented extrude hone porting in Dania Beach FL. This means you can trust us to deliver superior results every time. If you would like a quote on extrude hone porting, please call (562) 531-2976 now.