Rely on Extrude Hone AFM for highly precise internal deburring in Columbus OH
Surface finishing is an extremely important part of the manufacturing process for just about any type of metal part. This is especially true of parts with internal passages that come off the line full of burrs. Without internal deburring in Columbus OH, the part simply will not be able to achieve the high level of performance required.
Now you might be wondering: What’s So Bad About Burrs?
Even very small burrs can have a big impact on the performance of a part and/or the system the part is used in. Burrs may:
- Adversely affect performance by changing the flow of liquid or gas through the part
- Contribute to mechanical fatigue
- Break off and be carried away by flow to cause damage throughout the system
- Cause unnecessary damage to skin and tissue in the case of a medical component
- Trap bacteria or food particles, thereby contaminating a food processing application
The good news is, you can easily grind away burrs and improve your parts with Extrude Hone AFM’s internal deburring in Columbus OH.
Expert Internal Deburring in Columbus OH for Every Industry
At Extrude Hone AFM, we have pioneered a highly precise and totally controllable process for internal deburring in Columbus OH. The process is essentially one of controlled erosion, accomplished with an abrasive grit suspended in a polymer media that is forced through the part with a hydraulic ram.
By choosing harsher or finer grits, thicker or thinner carrier media, and higher or lower concentrations of grits in the media, and by controlling the speed, pressure, and temperature at which the material runs through the internal passages, we can produce the exact result required for your application. The process results in highly uniform results on all internal surfaces, so that the part’s geometry is not compromised by rather enhanced by the deburring.
The flexibility of our process has allowed us to provide precise internal deburring in Columbus OH for the most exacting of industry applications, including:
For Reliable Results on Any Metal, Trust the Pros at Extrude Hone AFM
In many applications requiring internal deburring in Columbus OH, it isn’t enough to just remove the burrs. You also need to be sure that the internal geometry of the part is perfectly preserved. Naturally you want to be sure you choose an experienced contractor like Extrude Hone AFM.
We have been doing all kinds of deburring and polishing since 1971, and we know exactly how to set up the parameters of the job to remove the exact right amount of material from any metal, from the hardest super-alloys to softer meals like aluminum and copper. For a quote on your project, please call (562) 531-2976 now.