Enhance the performance of your engine with extrude hone porting in Kansas City MO
If you are a gearhead, you are most likely already familiar with the benefits of porting intake and exhaust manifolds and other engine components to enhance fuel and air flow. But do you know the most effective method for getting this done?
Hint: it’s not porting by hand.
It’s extrude hone porting in Kansas City MO.
Extrude Hone AFM’s founder actually pioneered the use of abrasive flow machining for Extrude hone porting in 1974. Unlike hand porting methods which are prone to error, extrude hone porting in Kansas City MO removes material at a consistent and uniform rate.
Though the first application of extrude hone porting was designed for a chainsaw motor, the technique has since been adapted for:
- Racing engines
- Muscle cars
- Personal watercraft
- High-performance trucks
How Extrude Hone Porting Works
Extrude hone porting uses an abrasive-laden polymer that can conform to the exact dimensions of the passage. As the polymer runs through the part, it becomes a flexible slug that sands away material evenly on all sides of the hole or passage. We can control the process to remove the precise amount of material required to enhance your part.
Benefits of Extrude Hone Porting in Kansas City MO
Any passage that directs fuel or air flow can benefit from extrude hone porting in Kansas City MO. The biggest improvements in engine performance are seen from porting the manifolds, but porting can also improve engine heads, turbo impellers, housings and pumps, and 2 or 4 stroke cylinders.
After extrude hone porting, parts have a freer flow with greater velocity. This in turn encourages improved combustion in the engine, resulting in:
- Increased horsepower
- More thrust
- More torque
- Increased fuel efficiency
- Reduced emissions
Typically, extrude hone porting in Kansas City MO on a manifold increases flow up to 25 percent. The amount of improvement you see in your engine performance will depend on its condition and configuration.
Why Choose Extrude Hone AFM
Extrude Hone AFM is a leader in the abrasive flow machining process used for extrude hone porting in Kansas City MO. We’re not an automotive store that just dabbles in this technique! We invented it, we know it inside out, and we guarantee your part will be processed properly to your exact specifications.
We are happy to provide quotes and more information about extrude hone porting. Please call (562) 531-2976 or use our online contact form to reach us.