Rely on Extrude Hone AFM for highly precise internal deburring in Pittsburgh PA
Whether parts are made by conventional machining, casting, EDM, or laser sintering, the surface finish won’t be perfect. Instead it will have some amount of pits and burrs, especially in the hard-to-reach internal passages. Fortunately, our process for internal deburring in Pittsburgh PA can polish even the most convoluted internal passages to remove even the tiniest burrs.
Now you might be wondering: What’s So Bad About Burrs?
Internal burrs can have a disastrous effect on the performance of a part. For example, burrs can:
- Adversely affect performance by changing the flow of liquid or gas through the part
- Contribute to mechanical fatigue
- Break off and be carried away by flow to cause damage throughout the system
- Cause unnecessary damage to skin and tissue in the case of a medical component
- Trap bacteria or food particles, thereby contaminating a food processing application
The good news is, you can easily grind away burrs and improve your parts with Extrude Hone AFM’s internal deburring in Pittsburgh PA.
Expert Internal Deburring in Pittsburgh PA for Every Industry
At Extrude Hone AFM, we have pioneered a highly precise and totally controllable process for internal deburring in Pittsburgh PA. The process is essentially one of controlled erosion, accomplished with an abrasive grit suspended in a polymer media that is forced through the part with a hydraulic ram. By choosing harsher or finer grits, thicker or thinner carrier media, and higher or lower concentrations of grits in the media, and by controlling the speed, pressure, and temperature at which the material runs through the internal passages, we can produce the exact result required for your application. The process results in highly uniform results on all internal surfaces, so that the part’s geometry is not compromised by rather enhanced by the deburring.
Due to the high degree of precision and control that is possible with our internal deburring in Pittsburgh PA, we can provide finishing for any industry application, such as:
For Reliable Results on Any Metal, Trust the Pros at Extrude Hone AFM
When you need internal deburring in Pittsburgh PA for a precise application, rely on Extrude Hone AFM. We’ve worked on all kinds of parts made from the toughest super alloys to softer metals like aluminum and copper. For a quote on your project, please call (562) 531-2976 now.
