Enhance the performance of your engine with extrude hone porting in San Diego CA
If you know a lot about cars, you probably already know that parts like intake and exhaust manifolds are seldom optimized for the best fuel and air flow in your average vehicle--instead, these parts must be ported. But do you know the most effective method for getting this done?
Hint: it’s not hand porting, as many DIY sites suggest.
It’s extrude hone porting in San Diego CA.
Extrude hone porting, a process which was pioneered over 30 years ago by Extrude Hone AFM’s founder, has since become the process of choice for all kinds of engine enthusiasts. Several manufacturers including Cadillac and Ford have adopted this process for their top models, and countless individuals have used it for aftermarket improvements on:
- Racing engines
- Muscle cars
- Motorcycles
- Personal watercraft
- High-performance trucks
How Extrude Hone Porting Works
Whereas hand porting can only improve surfaces that hand tools can reach, extrude hone porting in San Diego CA can improve the entire passageway and carries no risk of ripples or unevenness. This is accomplished by passing a putty-like polymer media loaded with abrasive grit through the passages under pressure from a hydraulic ram. We can control the process to remove the precise amount of material required to enhance your part.
Benefits of Extrude Hone Porting in San Diego CA
Extrude hone porting in San Diego CA can deliver many benefits for any passage that gas or liquid will be flowing through. The most commonly ported parts are intake and exhaust manifolds, but we can also port engine heads, turbo impellers, housings and pumps, and 2 or 4 stroke cylinders.
After extrude hone porting, parts have a freer flow with greater velocity. Fuel is burned more efficiently and exhaust is evacuated more completely. The result is:
- Increased horsepower
- More thrust
- More torque
- Increased fuel efficiency
- Reduced emissions
Typically, extrude hone porting in San Diego CA on a manifold increases flow up to 25 percent. This will translate into different degrees of improvement in performance depending on how your engine is set up.
Why Choose Extrude Hone AFM
Extrude Hone AFM is a leader in the abrasive flow machining process used for extrude hone porting in San Diego CA. We’re not an automotive store that just dabbles in this technique! We invented it, we know it inside out, and we guarantee your part will be processed properly to your exact specifications.
If you would like a quote on extrude hone porting, please call (562) 531-2976 now.