Enhance the performance of your engine with extrude hone porting in Anaheim
Porting intake and exhaust manifolds is often a necessary step for achieving optimal performance in an engine. As a motorsports enthusiast, you probably already know this. But do you know the most effective method for getting this done?
Hint: it’s not hand porting.
It’s extrude hone porting in Anaheim.
Extrude hone porting, a process which was pioneered over 30 years ago by Extrude Hone AFM’s founder, has since become the process of choice for all kinds of engine enthusiasts. We personally demonstrated this technology to Ford in 1992 and today it is used to enhance some of their top models. Extrude hone porting is also commonly used on parts for:
- Racing engines
- Muscle cars
- Motorcycles
- Personal watercraft
- High-performance trucks
How Extrude Hone Porting Works
One of the biggest limitations of hand porting--besides the incredible level of skill and control that is required to abrade the metal evenly--is that it can’t reach deep into the twisting passages of a manifold or other part. Extrude hone porting in Anaheim, on the other hand, can reach every millimeter of all sides of any passage. This is accomplished by passing a putty-like polymer media loaded with abrasive grit through the passages under pressure from a hydraulic ram. We can control the process to remove the precise amount of material required to enhance your part.
Benefits of Extrude Hone Porting in Anaheim
By reducing turbulence, extrude hone porting in Anaheim can benefit any passage that will be directing air or fuel through the engine. The most commonly ported parts are intake and exhaust manifolds, but we can also port engine heads, turbo impellers, housings and pumps, and 2 or 4 stroke cylinders.
After extrude hone porting, parts have a freer flow with greater velocity. This in turn encourages improved combustion in the engine, resulting in:
- Increased horsepower
- More thrust
- More torque
- Increased fuel efficiency
- Reduced emissions
Typically, extrude hone porting in Anaheim on a manifold increases flow up to 25 percent. This will translate into different degrees of improvement in performance depending on how your engine is set up.
Why Choose Extrude Hone AFM
Extrude Hone AFM is a leader in the abrasive flow machining process used for extrude hone porting in Anaheim. We’re not an automotive store that just dabbles in this technique! We invented it, we know it inside out, and we guarantee your part will be processed properly to your exact specifications.
If you would like a quote on extrude hone porting, please call (562) 531-2976 now.
