Get Honed Out Motorsport In Nashville TN To Improve Your Engine's Performance
Do you want to get the best possible performance from your engine? Getting your intake manifold honed out motorsport in Nashville TN may be just what you’re looking for. This process can benefit all kinds of engines, from race cars to motorcycles and even personal watercraft.
How Extrude Honing Works
When a part is honed out motorsport in Nashville TN, a small amount of metal--about 1 mm--is removed from the surfaces of the interior passages. While it is possible to hone by hand, this requires great skill and lots of time. And even the most expert technician won’t be able to reach around the curves of all the interior passages.
Abrasive flow machining is faster and easier. All interior surfaces can be reached and smoothed evenly. This is made possible through the use of a specially formulated polymer media that, when pressurized, conforms to the shape of the interior passages and abrades them on all sides. Because the media allows the abrasive particles to recirculate, there is always fresh abrasive at the surface and every millimeter of the passage will undergo consistent and controllable removal.
Benefits for Performance
Getting essential engine components honed out motorsport in Nashville TN can increase fuel and air flow by up to 25 percent. This in turn will give you:
- Increased horsepower
- More thrust
- More torque
- Better fuel efficiency
- Lower emissions
What Kind of Parts Can Be Honed Out Motorsport in Nashville TN?
At Extrude Hone, we can create different abrasive media formulations to accommodate just about any part you might want to have honed out motorsport in Nashville TN. This includes both aluminum and cast iron parts. We frequently hone intake manifolds, as well as exhaust manifolds when there is no aftermarket alternative available. One part that cannot be honed out motorsport is the header; however we can put a weld bead on the outside and then smooth down the inner weld to create a better angle for you.
Why Choose Extrude Hone
Extrude Hone pioneered the automotive abrasive flow machining process, which is now accepted and used worldwide to improve performance at top brands including Ford. We understand the science behind the process in detail, meaning we can deliver superior results with the size of the abrasive particles, type of polymer media, the pressure level, and the tooling holding your part customized to your specific needs. Our skill is particularly important when you want flow matched parts, since parts cannot be honed together.
Send Us Your Components Today
Considering getting your intake manifold or other part honed out motorsport in Nashville TN? Call Extrude Hone at (562) 531-2976. We’ll give you all the details on what it costs, how long it takes, and what you need to do to prep your parts.
